kienan
/
temperature-logger-interface
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
temperature-logger-interface/README.md

922 B
Raw Blame History

Interface for the arduino temperature logger. It is meant to be run on a machine connected to the arduino.

Installation

Requires Python 2.7+

The packages listed below are the dependencies for both the cli parser & the kivy-based UI.

Python Packages

The easiest way to get these is to use pip or a similar tool, eg. your distro's repo if the versions are recent enough

  • pyserial
  • numpy
  • kivy 1.9+ (see installation instructions for kivy)
  • pygame / PIL
  • matplotlib 1.4.3+

Detailed instructions on debian 8 (jessie, lxde install)

  • sudo apt-get install python python-dev python-pip libgl1-mesa-dev
  • sudo pip Cython==0.21.2 pyserial numpy matplotlib kivy==1.9

Command-line only

  • sudo apt-get install python python-pip
  • sudo pip install pyserial

Icons

The graphical interface uses icons from the Simplicio icon set by Neurovit: http://neurovit.deviantart.com/