d79a1a821d
Je préfére mourir que de m'installer sur un truc sans ACL !
2011-05-23 16:17:52 +00:00
19317ccbec
Ca fait marcher mpm-itk mais ca casse la génération du .deb
2011-05-22 19:18:43 +00:00
0a0f5bc77a
On continue mpm-itk
2011-05-22 17:23:59 +00:00
5b691210d0
ACL pour MPM-itk
2011-05-22 09:22:45 +00:00
7ee9291e61
fixing apache module loading at install time
2011-03-28 06:38:24 +00:00
0edb3c4e37
trying to fix #460 by launching update domaines set dns_action='update'; at alternc.install ends
2011-03-27 11:23:28 +00:00
d43f7fdf9d
Update postfix destination to add AlternC desktop FQDN when it's not present.\nCloses #1215
2011-03-13 14:37:37 +00:00
dcff7e616c
Des morceaux de Apache1 qui restaient
2011-03-07 08:31:46 +00:00
4e0f98b93e
Vaguement :
...
- correction de qques identation (et surement rajout d'erreur)
- supression de apache 1 (c'est plus maintenu, on va pas s'étaler)
- suppression du mass vhosting
- corrections de bugs divers et varié
2011-03-06 18:06:27 +00:00
33e70e138a
Quand on change le FQDN, utile de recreer les liens symbolique
2011-03-04 13:05:55 +00:00
b17ab07b99
Dans les script debian, faut du DASH ou du SH, pas du bash...
...
Toutefois, j'ai quand même rajouté la dependance bash a alternc (besoin pour update_domaines)
Normalement, maintenant ca s'installe sous squeeze.
2011-02-28 16:43:03 +00:00
e155c6c531
Hop
2011-02-28 15:27:31 +00:00
48ddeb9fbf
Ok. Toujours le bug 1173, je pensais pas que Alternc voulait ça. Owned
2010-12-20 17:15:34 +00:00
ff029755d5
Ferme le ticket #1173
2010-12-20 16:56:37 +00:00
4fd0c76dd2
Vieux bug : activation de mod_rewrite a l'installation
2010-12-20 16:50:08 +00:00
20bf38d89f
moving creation of /var/backups/alternc/etc-installed.tar.gz far below, to prevent improper apache/proftpd config file change afterwards
2010-06-03 10:32:12 +00:00
20a7bb01c4
reverting a badly made patch
2010-03-04 14:32:02 +00:00
7d711eabcf
alternc.install proftpd module tls management
2010-03-04 14:23:38 +00:00
165aa0052d
do not overwrite named.conf
...
we still overwrite named.conf.options and that is where we do our
includes. that seems to be relatively acceptable upstream as they mark
only named.conf as a conffile.
See: #1025
2009-08-04 19:43:10 +00:00
99d319dce5
Update of debian/control for Debian lenny(5.0) compatibility
...
Update of alternc.install to use force-reload, reload seems to no more be used
2009-02-17 21:20:23 +00:00
daf93a81f2
fix usage instructions
2009-01-29 01:09:40 +00:00
d5a5a929a6
move sessions to a shared /var/alternc/sessions
2008-10-31 17:55:06 +00:00
f47b431596
configure alternc-slave as a primary MX for the main server
...
this aims to resolve a lot of mail problems we are having on our deployment at Koumbit
2008-10-23 18:37:40 +00:00
2363fe5b47
fix apache restart sequence so they don't get restarted twice and only if necessary
2008-10-07 20:14:15 +00:00
7e8e9b1d6c
put the listen directive in the apache2-ssl config
2008-10-07 18:39:44 +00:00
b1a6bcf43e
create a apache2-specific SSL configuration file
2008-10-07 18:34:02 +00:00
c39d6991bf
configure SSL properly, that is, only if a certificate is provided
2008-10-07 18:28:39 +00:00
72328a9f4b
configure SSL on apache2
2008-10-07 18:00:06 +00:00
57b53fe31b
disable the default site in apache2 since it obstructs our configuration
2008-10-07 17:23:09 +00:00
0184e3c641
move the apache config code into alternc.install
...
this makes sure that apache is properly restarted after install and factors code out of the two postinst files
2008-10-07 17:21:18 +00:00
3bcb5159f9
stop overwriting named.conf
...
starting this release, only named.conf.options will be replaced (as we
need to modify the options {} block and can't just add another one). We
still install a named.conf, a fresh version from Lenny this time, so
that we get a clean start.
Also get rid of the bind_internal parameter that is not really used or
recommended, as it allows for authoritative nameservers to also serve
recursive queries (which is bad practice).
See: #1025
Closes : #1104
2008-10-06 23:58:04 +00:00
9a79f43537
fix parameter expansion in postconf
...
See: #1029
2008-10-06 22:48:58 +00:00
ca6dfe5d83
don't warn on main.cf configuration changes
2008-10-06 22:21:37 +00:00
704bc022ec
explicitely backup main.cf configuration even though we don't replace
...
it totally
See: #1029
2008-10-06 22:20:48 +00:00
77ddb5002f
do not override Postfix's main.cf: instead, we use a /etc/alternc/postfix.cf to hold our configuration changes and apply that on postinst.
...
Closes : #1029
2008-10-06 22:12:41 +00:00
cdb3a1e281
remove alternc/mynetwork debconf parameter, stop overriding it in
...
postfix
also split the config prompts between slave and non-slave package
See: #1029
2008-10-06 21:13:11 +00:00
66da56d2df
always run tar in C locale so that grep works properly
2008-10-04 18:54:03 +00:00
0de778c41c
move basedirprot call to postinst also
2008-10-04 16:50:14 +00:00
270c7a6e37
move /var/alternc-specific commands from alternc.install to postinst
2008-10-04 16:48:30 +00:00
8f43b19340
security precaution: leave the my.cnf readable only to the webserver. we're protected by the openbasedir
2008-07-10 21:37:29 +00:00
115fe16dbf
use the proper variable for database user replacement. Closes : #1124
2008-04-17 23:04:26 +00:00
7cfa0db5ed
fix mysql.cnf regexp for a last time, i hope
2008-04-14 03:22:10 +00:00
becf621bb4
fix quoting again
2008-04-14 03:14:25 +00:00
21f2254a00
be more verbose in template expansion
2008-04-14 03:10:58 +00:00
6bedb59def
last minute fix: fix template instantiation for mysql passwords
2008-04-14 03:01:13 +00:00
d5a4c72e4a
Major redesign of the MySQL backend interface to fix a security issue.
...
See: #318 .
As of now, the MySQL configuration used everywhere by AlternC is not
stored in the main configuration file (/etc/alternc/local.sh) but in a
MySQL configuration file in /etc/alternc/my.cnf, which enables us to
call mysql without exposing the password on the commandline.
The changes here are quite invasive but will allow us to factor out
the MySQL configuration better. See #364 .
This includes a partial rewrite of the mysql.sh logic, which is now ran
from the postinst script (and not alternc.install) which will allow us
to actually change the MySQL root user properly. See #601 .
This commit was tested like this:
* clean install on etch (working)
* upgrade from a clean 0.9.7 (working)
2008-04-13 04:35:19 +00:00
75e2f1cba1
Another fix to allow alternc to consider the php5 in an apache2 environnement
...
AlternC isn't ready to be install in an apache2 only environnement
- proftd depend on apache-ssl
- the link are built by the deb package and if /etc/apache(-ssl)/conf.d didn't exist the installation failed ...
2007-10-05 14:46:40 +00:00
03038d18dd
Suppress an usueless restart of apache in dopo.sh
...
This chek is althought apache 1.3 dependent.
Modify the check before enabling the modules for apache2. Now it show be possible to perform an aptitude install apache2 php5 alternc ...
I hope :)
2007-10-05 14:31:05 +00:00
251cb7db6d
restart with stop/start instead of restart (...) apache AND apache2 (test)
2007-09-27 08:29:11 +00:00
df3b3b0769
ensure that php variable is correctly expanded
2007-09-27 08:18:50 +00:00
6d36e8722f
fix php call. Closes : #1064
2007-09-11 21:55:55 +00:00
4be66099c0
try to rely on the actual .so presence instead of the package for libapache-mod-php*
2007-09-09 20:48:42 +00:00
06fe7d5e98
remove useless test -x for init.d services, invoke-rc.d takes care of that
2007-09-09 20:32:16 +00:00
233397e37a
try to reload apache2 too, install symlinks for apache2 if available
2007-09-09 20:31:35 +00:00
1908e3bf27
fix stupid typo in regexp
...
See: #1062
2007-09-09 19:37:08 +00:00
d6cbfcb1ce
first attempt at making alternc apache2-compatible
...
revert to manual configuration of modules.conf since apache-modconf doesn't really work
move apache-ssl to recommends since it has no equivalent in the apache2 world
2007-09-09 19:17:45 +00:00
a563a4fdc4
add missing functions include
2007-09-09 18:56:31 +00:00
dc8c4de66b
re-establish apache-modconf as means of enabling vhost_alias and php modules, don't talk to ucf
...
Closes : #1062
2007-09-07 19:38:02 +00:00
f8fbb858a5
force the restart of apache & apache-ssl : Fixes #1000
2007-08-26 20:44:53 +00:00
3695904d0d
regenerating locale in another way
2007-08-26 19:34:17 +00:00
cefd4f7f25
regenerating locales if needed, so that languages works ...
2007-08-26 19:14:51 +00:00
3064ac14ed
we must restart services : apache and apache-ssl have to much modifications to be only reloaded ...
2007-08-26 19:05:22 +00:00
acf7ae05d3
debugging alternc.install apache modconf
2007-08-26 19:01:52 +00:00
41f20a8dcc
adding /usr/lib/cgi-bin as the auth folder for awstats.pl \!
2007-08-26 18:33:40 +00:00
7e24dd2e59
debugging alternc.install apache modconf
2007-08-26 18:07:28 +00:00
70e33d5231
debugging alternc.install apache modconf
2007-08-26 17:41:14 +00:00
73e1c87b0a
apache modules manual install
2007-08-23 17:14:17 +00:00
65ce0863af
suivi du conseil d'anarcat dans #1013
2007-08-23 08:25:45 +00:00
5f59a52a6f
Now we use MYSQL_HOST in mysql.sh. Should work with remote mysqld. Updates #1013 (to be tested though)
2007-08-23 08:24:15 +00:00
e05aece60e
We configure postfix even when main.cf don't exist. Fixes #1009
2007-08-23 08:01:01 +00:00
e8299927e9
Fixing etch ftp configuration, Fixes #1046
2007-08-22 22:32:12 +00:00
b960b55851
enable apache module also
2007-05-31 20:40:16 +00:00
051ce2dc61
it's override_php, not override.php ...
2007-05-31 17:15:04 +00:00
2a93b7e227
Loading Apache vhost module thanks to apache-modconf, and not manually in /etc/alternc/apache.conf : The module is now loaded at the right place.
...
Fix the bug with apache aliases (/admin/sql, /webmail)
2007-05-11 08:12:43 +00:00
9245031133
use reload instead of force-reload since the latter doesn't seem to
...
work with apache
2006-11-28 03:40:44 +00:00
4404569e2b
My stab at #563 : stop overwriting php.ini.
...
Most parameters different from the factory default are now set for the
whole /var/alternc, apart from those very notable exceptions, which
are not set by Alternc anymore:
* precision = 12 ; The number of significant digits displayed in floating point numbers.
* y2k_compliance = On ; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
* safe_mode_allowed_env_vars = PHP_,LANG,LC_
* highlight.*
* max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
* log_errors_max_len = 1024 ; Do not log repeated messages. Repeated errors must occur in same file on same
* ignore_repeated_errors = Off ; line until ignore_repeated_source is set true. * ignore_repeated_source = Off
* report_memleaks = On
* warn_plus_overloading = Off
* register_globals = On ; enfin!
* default_charset = "iso-8859-1" (see #381 )
* upload_max_filesize = 5M ; left to admin's discretion
* default_socket_timeout = 60
* mysql.*
* pgsql.*
* sybase.*
* dbx.*
* session.*
* mssql.*
* extension=mysql.so ; we assume the php-mysql packages does this properly
The cgi/ subdir was never really changed, afaict.
2006-11-27 23:52:50 +00:00
173e86a3c0
retirer httpd.conf de l'installation d'alternc, les symlinks devraient maintenant suffire. testing obligatoire. see #562
2006-07-08 09:22:58 +00:00
2969280afa
on ne prends pas en compte les gid / uid / mode differs lors du diff des fichiers de conf
2006-05-04 09:03:31 +00:00
abc975efd9
move bureau.conf with the templates, as it is one, should fix #646
2006-04-26 21:38:32 +00:00
c34386e9a4
activate a configuration file for the bureau, common for both SSL and non-SSL configs, requested by pierre-gilles et
...
benji.
activate variable substitution for bureau.conf in alternc.install
2006-04-26 21:23:50 +00:00
11b5e1a1c2
erreur ->
2006-04-26 14:00:52 +00:00
6ca8255f49
AlternC Plugin are now part of AlternC svn repository\n Migration Phase 2
2006-04-26 12:28:53 +00:00
Alan Garcia